Updated for the Summer of 2019, the BLOOM v2 – MIDI takes everything people love about our original BLOOM and updates it with MIDI!
The BLOOM v2 – MIDI now offers MIDI control over all 6 compression settings, circuit ON/OFF (COMP, EQ, BLOOM) and bloom level; the bloom level can also be expressed via MIDI! Keep reading below to learn how the BLOOM has become a modern classic on countless pedalboards!
The Bloom from Jackson Audio is a comprehensive dynamic engine that is designed to give guitarists maximum dynamic tonal control in ways never before possible.
A three-fold device, the Bloom manipulates the dynamics of the instrument by way of precisely tuned compression, equalization, boost and sustain circuits which can be activated separately or in tandem with each other.
Keep reading below for more information about the BLOOM!
As a compressor, the Bloom features an optical limiting circuit that takes its inspiration from compressors designed during the golden age of vacuum tube circuits. Optical compressors as they are called, are known for their transparency and subtlety. While the Bloom can provide a very aggressive response at more extreme compression settings, its real strength lies in its ability to add a gentle sweetening and roundness to the tone as the optical circuit works to polish off any rough edges in the sound.
Because of its natural and touch responsive bloom, the Bloom is ideal for players who typically don’t use compression but want the ‘mastered’ response that optical compression gives a guitarists tone.
The frequency response of the compressor section is flat as a board and does not boost or cut any of your highs or lows. In fact for the demo videos we recorded, Dow Tomlin (Bass Player for Wynonna Judd) used the Bloom on his bass the entire time and loved it! Just like a well designed compressor should, the Bloom alters the dynamics of the guitar signal and not the tone. A good compressor should be felt and not heard!
Dual Compression – Aka Slide Mode
During the design phase of the Bloom we consulted with slide master Joey Landreth, of The Brothers Landreth fame, on what an ideal compressor for guitarists as well as slide players would be. After going back and forth with him it soon became clear that to build the ultimate compressor for guitarists we would have to include the option to run two compressors in series with each other to provide the legendary Lowell George slide tone. Lowell George, the bandleader/singer/songwriter/guitarist for the band Little Feat was famous for using two Urei 1176 compressors in series with each other to give his guitar near infinite sustain while still remaining crystal clean.
When set to compression preset 5 or “Slide Mode” the aux compressor circuit is activated and placed in series ahead of the primary compressor. The tonal result of using two compressors in series is that notes will sustain almost endlessly and oftentimes break out into harmonic feedback while still remaining clear and clean! It ‘feels’ like you have an overdrive pedal on but the tone is still clean with endless sustain!
Hidden inside the Bloom, is a auxiliary compressor circuit that is identical to the main compressor circuit however without externally mounted controls. This aux compressor, which is set with a fast attack of 7.5ms, has two trimmers mounted on the right side of the pedal and are accessible when the cover is removed. These trimmers allow you to adjust the COMP and VOLUME settings of the aux compressor when using compression presets 5 and 6. More on compression presets later.
When more subtlety is desired from the compression circuit, we have included a BLEND control that allows the player to blend in their clean, unaffected signal back in with the compressed signal. One of the best features of the Blend control is that it allows the player to dial in a really aggressive compression setting and then blend some of their clean signal back in with it. This produces the effect of giving the note a very natural attack while slowly fading in the sustain that comes from running a high compression setting.
If you’re not a studio engineer, many of the more fully featured compressors on the market can be really intimidating and overwhelming with knobs for everything including attack, release, ratio, knee etc. As a guitar player I typically like to keep things as simple as possible and prefer to
think in terms of which settings would be the most appropriate for the style of music I’m about to play.
Not all players are the same and not all songs require the same compression settings, that’s why we have designed the Bloom to have six compression presets that give the player six distinct options for their attack and release settings. These settings run the gamut from subtle to extreme and allow the player to quickly dial in the perfect compression setting for the next song.
Midi – new for 2019!
Since the BLOOM first came out, we have received many requests from our players saying that adding MIDI to the BLOOM would make it the perfect compressor and we completely agree! Always we take player feedback as a primary driver of product delelopment and we are very proud to announce that the most flexible compressor on the just got better with the addition of MIDI! NOTE: In order to accomodate this new feature, for space reasons, we were required to eliminate the SIDECHAIN that the original BLOOM featured.
By default, the BLOOM v2 – MIDI ships with MIDI Channel 1 being the selected channel. This can be changed by pressing and holding both the COMP and BLOOM footswitches while applying power to the BLOOM. While holding these footswitches down adjust the BLOOM knob. All the way down is MIDI Channel 1…all the way up is MIDI Channel 16 with channels 2-15 being located evenly between those two points as you rotate the BLOOM knob.
You’ll notice that as you rotate the BLOOM knob, the BLOOM LED will flash to indicate which MIDI channel you have selected. IE – 7 flashes = MIDI Channel 7. After the LED flashes, we inserted a 2 second pause so you could tell when the LED was finished flashing. The LED will continue flashing as long as you are holding down the two footswitches. Once you have selected the MIDI channel you want and have verified it by counting the flashes, simply release the two footswitches and the pedal will save this MIDI Channel to the internal EEPROM on the microprocessor and reboot.
Accessing the new MIDI features of the BLOOM is done by a combination of Program Changes as well as Control Changes. Below is a list of the features of the BLOOM that can be accesed via MIDI and how to access them.
3 Band Equalizer Overview
The EQ circuit features a studio grade EQ that gives tremendous tonal flexibility to the BLOOM. Based on the legendary Baxandall EQ that is featured in countless studio EQ’s, the Bloom EQ takes this circuit and tailors it for guitarists! We spent tons of time on this EQ dialing it in so it would hit all the frequencies that guitarists need to adjust, and then sweetened it by removing the ear fatiguing highs and lows that can appear at extreme settings.
The Bloom circuit is one of the most exciting parts of the Bloom! Designed as both a level booster and sustainer, the Bloom can work as a set boost by quickly pressing and releasing the Bloom footswitch, or by pressing and holding the Bloom footswitch, the Bloom circuit will slowly ramp up the level to the level set by the boost. This ramp up time, which is programmable, can be used to increase sustain on held notes or to match the dynamics in a song. Once the ramp up is complete, pressing and holding the Bloom footswitch again will fade the level back down to unity.
Acts as a master volume for the primary compressor section. Changes to the COMP and BLEND knob will typically necessitate a change to the Volume control to keep the overall level the same.
TIP! – When using high levels of compression, keep the VOLUME control at 3:00 or lower to avoid any unwanted clipping in the compressor circuit.
Allows you to blend in your clean uncompressed signal with the compressed signal. Full counter clockwise is full compression. Fully clockwise is full clean signal. TIP! Try running your COMP knob full up and use the BLEND control to adjust the intensity of the compression. Doing this will allow the attack of your note to feel normal while adding sustain to the back end of the note.
Turn clockwise for more compression. Balance this with the BLEND and VOLUME control.
The 12:00 position is totally flat with +/-12dB boost/cut on either side of center.
The 12:00 position is totally flat with +/-12dB boost/cut on either side of center. The mid frequency is centered around 660hz.
The 12:00 position is totally flat with +/-12dB boost/cut on either side of center.
Sets the amount of boost when the BLOOM footswitch is engaged. Also is used to set the Bloom fade time when in Program Fade mode. When the Bloom is activated, turning the BLOOM control will change the BLOOM led to indicate the amount of boost present.
To activate/deactivate the compressor circuit simply press the COMP footswitch. To select a compression preset, press and hold the COMP footswitch for more than 1 second and compression program mode will become active. When in this mode, the COMP led will flash to indicate that you are in program mode. A quick tap on the COMP footswitch will cycle the compression presets and you’ll be able to hear these preset changes as you cycle through them assuming that the compression circuit was active when compression program mode was entered. Once you arrive at a compression preset that you want to use, press and hold the COMP footswitch for more than 1 second and compression program mode will exit.
Note. When compression mode is exited, the selected compression preset is written to the internal EEPROM on the microprocessor and that will become your default compression setting when the compressor is engaged.
To activate the Boost feature of the Bloom simply press the BLOOM footswitch. To activate the Bloom feature (slow fade up to boost level) press and hold the BLOOM footswitch for more than 1 second. The inverse is also true. To fade down from a boost setting, press and hold the BLOOM footswitch for more than 1 second.
To set the period of time that it takes the Bloom feature to reach the set level of boost, press and hold both the COMP and BLOOM footswitches simultaneously for more than 1 second and ramp program mode will become active. When in this mode, the BLOOM led will slowly fade from off to full brightness at a regular interval with the BLOOM knob setting the duration of that interval. The fade time is as quick as 1 second at the full counter clockwise position of the BLOOM knob to as much as 5 seconds at the full clockwise position of the BLOOM knob. To save this setting, press and hold both the COMP and BLOOM footswitches simultaneously for more than 1 second and ramp program mode will exit.
To activate the EQ, press and release the COMP and BLOOM footswitches simultaneously.
We want you to feel confident with your Prymaxe purchase, which is why when you purchase a new product from us, you are automatically enrolled into our FREE Two Year Warranty.*
What is covered:
What is NOT covered:
* We reserve the right to end this promotion at any time.
All in stock orders placed before 1pm EST will ship same day and all orders placed after the cutoff will ship the next business day*. If you need an order immediately, please let us know and we’ll try our best to accommodate your request.
Most orders shipping within the US will ship via USPS or FedEx and are fully insured, we also offer express options if you need an item within 24 hours. All tracking numbers will be sent via email after the item is shipped. If you did not receive your tracking number please feel free to call or email us.
All US Orders $49+ Ship for FREE
We love and truly appreciate all of our International customers. All of our international shipments are fully insured and are guaranteed to be delivered or your money back. We offer a variety of shipping options for you to choose from and if for any reason there is an issue with your order we will make it right, that is our promise you.
Pre-Orders typically ship with 2 weeks. In the event a product is backordered we will contact you with an exact shipping timeframe.
Smaller items will ship USPS First Class.
USA shipping only for Barber Electronics, Boss, Darkglass, Dunlop, DryBell, EarthQuaker Devices, Eventide, EVH, Fender, Gretsch, Korg, Marshall, Music Man, MXR, PreSonus, Quilter, Roland, Schecter, Shure, Source Audio, Way Huge, Tech 21, Vertex, Voodoo Lab, Vox, Wampler.
What if my package gets stolen?
Please note: We are a small, family owned business. While we want to make sure you are satisfied with your purchase, we would like to try to limit the amount of returns as much as possible. This helps both us and the customer save time and money. If you are unsure about a product, please contact us before you complete the purchase, and we'll do our best to find the item that will best suit your needs. Prymaxe reserves the right to define abuse of the return policy on a case by case basis and consequently refuse subsequent return requests by said abuser and place them "All Sales Final".
Last Updated: March 27, 2018
If you are not 100% satisfied with your purchase, you can return it within 45 days of the original purchase date for a store credit refund, or within 14 days of the original purchase date for a refund to the original purchase method (PayPal, credit card, etc). If an item is not received by us within the 45-day window, the package will be refused. All new items returned must be in BRAND NEW condition with zero signs of wear or use and must be returned in the original packaging with ALL materials (free/bundled items -- must be unused/unopened, warranty cards, plastic, pouches, manuals etc.). We reserve the right to charge an up to 15% restocking fee on any opened guitars, amps, or keys being returned.
Our 45-Day Satisfaction Guarantee covers brand new products only -- it does not cover used and clearance products (see below). It also does not cover items in the “What is NOT Returnable” list below. Please note: All actual shipping fees paid by Prymaxe will be deducted from your refund. This includes orders that qualified for free or subsidized shipping. Return shipping must be paid by the buyer. If you received a defective or incorrect item, please see our FAQ section below.
All Used and Vintage items come with a 48 hour approval period. Please contact us directly at firstname.lastname@example.org within 48 hours of receiving your product for us to set up a manual return for you. Be sure to include your order number and reason for return in the email. All Used/Vintage items must be returned in the same condition they were sent to you in, as well as include all materials that came with it.
All returns should be insured by the buyer and sent via UPS, Fedex, or USPS with tracking. Please do not write on or attach tape or labels to the product box (these will be refused) -- use a packing box to return the product. Attach a shipping label with the RMA number onto the shipping box. Packages without a valid RMA number on the outside of the box will be refused.
To request an RMA number, please email email@example.com. We do not issue RMA by phone.
When will I get my refund?
Once your return is received by us, your refund will typically be processed within 10-15 business days. It typically takes a few business days for all credit card refunds to be processed and reflected on your statement. This means it will take a few extra days for your refund to show in your account after your return is processed. Store credit refunds will be given in the form of a e-gift card which will be available for immediate use after it is emailed to you. Please note: All actual shipping fees paid by Prymaxe will be deducted from your refund. This includes orders that qualified for free or subsidized shipping. Return shipping must be paid by the buyer. If you received a defective or incorrect item, please see the next question.
What if I receive a defective or incorrect item?
If a product is defective upon arrival, or the wrong item was received, all the shipping fees will be covered by us and we will send you a replacement once the original item is received. If for any reason a replacement wont be available for a significant amount of time, we will issue you a store credit to use on another item. For defective items, Prymaxe reserves the right to refuse the return if we determine the reason for the unit failing was not covered under the warranty (i.e., if the item was damaged due to user fault or error). If you feel your item was damaged in shipping, please take plenty of pictures of the damaged box and item and immediately contact us so we can open a claim with the shipping company.
Please be very diligent with testing your defective item. Be sure to try other guitars, power supplies, cables, and amps. We also request that you take a video of the item not working. If we receive your item, test it, and find it to be working, we will give you a refund minus the cost of shipping both ways and charge a 20% restocking fee.
When must I ship my return?
Your return must be received by us within 45 days of the original purchase date for store credit, or postmarked by 14 days for a refund to the original purchase method (PayPal, credit card, etc). This means you must ship your return with enough time for us to receive the package within the deadline. If it does not arrive within 45 days, we will refuse the package. If you feel you sent the package within a reasonable time frame, but it arrived late due to the shipping company’s error, please immediately contact us to make an appeal before we refuse the package.
What if I pre-ordered an item?
If a pre-ordered item arrives outside of the 45 day window from when you ordered it, you will have 7 days from the arrival date to send it back for store credit.
Why was my package refused?
There are a number of reasons your package could be refused by us, including: